PLEASE NOTE: This is the wireless bundle version that does not include the microRemote with iOS (the microRemote | blue with iOS app is not yet available)
The Redrock microRemote Wireless Focus Bundle brings an entirely new level of price/performance to professional-level focus control systems. This bundle includes all the main components needed for controlling your lens’ focus wirelessly with precision and power. Unlike other products that rely on a specific camera or lens combination, the microRemote is a universal focusing solution, and works on virtually every camera and lens. This is especially valuable as your needs and cameras evolve with each project or even with each shot.
The microRemote handheld controller is a professional-level wireless device loaded with features that make focusing easier and more intuitive.
Smooth Lens Control
The system maps any lens to its full 270 degrees of rotation, including DSLR lenses. You can change the lens direction, and use the unit left- or right-handed. Camera run/stop allows you to remotely start and stop your camera. The smooth weighted focus wheel has an exceptional feel and offers adjustable hard stops.
With the Redrock Torque motor, you can attach this to virtually any lens and camera combination: the microRemote is not limited to a specific camera body or lens type. The microRemote handheld wireless unit controls the motor via the basestation, and delivers precise and fast focus pulls previously only found in expensive high-end professional focus units.
The microRemote Basestation offers advanced features for automatic lens calibration or, if you use DSLR lenses with ‘infinite spinning’ focus rings, you can calibrate end stops manually. The basestation also provides centralized power to the motors and microTape (if one is attached).
Unique to the microRemote is the ability to use more than one type of controller: the wireless handheld, tethered (wired handheld), fingerwheel, or follow focus emulation with the optional handwheel. This bundle contains only the wireless handheld, but other options can be added without any overlap in product or price.
The microRemote can be used in virtually any situation where it’s difficult to pull focus directly from the camera: steadicam, jib arms, cranes, or just to have some extra room. In situations where wireless may not be possible or allowed, the optional tethering cable wires the microRemote for direct, interference-free operation.
This bundle is also fully upgradeable to our wired controller options. Just add the inexpensive fingerwheel controller and it’s ready to go for operator-controlled focus on a handheld rig, or as another control option for jibs and cranes. The microRemote Wireless Bundle is lightweight, compact, and an exceptional value.
- Works with virtually all cameras and lenses
- Automatic lens calibration (with manual calibration option)
- All lenses map to an expansive 270 degrees of rotation
- Left- or right-handed operation
- Lanyard loop
- Powerful Redrock Torque motor works with both cinema and still lenses
- Handwheel with adjustable hard stops
- Camera run/stop feature (with appropriate cable)
- Fingerwheel can be added for operator control
- Handheld can be used in tethered or wireless modes
- All-digital system
PLEASE NOTE: Cables are required for proper operation of this product. They are offered as an optional accessory for customers who wish to build their own cables. External power via p-tap power source is also required for proper operation. Lenses must be geared (such as cinema lenses) or have a gear attached to them (check out our microLensGears for gearing still photo lenses).
The microRemote FAQ
Please read this carefully, it covers the different configurations of the microRemote system. Make sure you are reading answers specific to your system.
Is the microRemote a digital or analog system?
The microRemote is an all-digital system, which is extremely precise, offers advanced features such as automated lens calibration, and is less prone to certain types of interference.
Does the microRemote have automatic lens calibration?
Yes. The microRemote offers both automatic and manual lens calibration.
Can I use the same basestation for wired and wireless controllers?
Yes, the basestation supports both wired and wireless control. The only exception is the microRemote ENG Bundle, which has no wireless option in the basestation, and is designed only for wired controllers.
I bought the Handheld Bundle with the fingerwheel; can I add the microRemote hand controller for wireless operation?
Yes, you simply purchase the wireless handheld controller and it automatically works with the rest of the microRemote components. You can also add the fingerwheel to the microRemote wireless bundle. You’ll have the best of both worlds wherever you start.
Are the optional cables required?
Yes, you will need cables to connect all the pieces. They are offered as an option because some customers prefer to make their own cables (for example, if they have a unique application that requires specific cable lengths). If you do not plan on making cables, you will need to purchase the bundle accessory pack.
How is the microRemote system powered?
The microRemote system is powered using external battery such as Anton Bauer, IDX, Switronix, etc. You need a powerful battery because moving a lens instantly and precisely takes a fair bit of energy. The microRemote handheld units are powered with internal batteries.
Does the microRemote work with the Redrock ultraCage powerPack?
Yes, in fact it’s a great way to power multiple camera-top devices including the microRemote. You still need an external battery, and the powerPack provides power splitting, conditioning, voltage conversion, and monitoring.
When will individual microRemote products be available?
The microRemote will first be offered in complete bundles. We will make individual components available once the demand for bundles has subsided a bit.
Is microRemote compatible with other motors?
Yes, in addition to the Redrock Torque motors, the microRemote system is compatible with Heden digital motors. It has also been suggested the microRemote is compatible with Preston motors, though we have not yet verified this.
Will the microRemote be powerful enough to drive my lens?
The microRemote system includes the Redrock Torque motors to meet the vast majority of focus needs, and compatibility with even more powerful motors for using the biggest, toughest lenses.
The Redrock Torque motor is a powerful, all-digital motor designed to work with all cameras and most lenses. We've successfully tested the Redrock Torque motors work with the following:
- Canon EOS lenses
- Zeiss DSLR lenses
- Zeiss CP2 lenses
- Nikon F mount lenses
- Almost all other DSLR lenses (Sigma, Tamron, Tokina, Olympus, Sony, etc.) where the lens ring is at least 1/2" wide (for fitting a lens gear)
- Cooke Panchros
- (we continue to test, and expect this list to continue growing)
If your lens is not listed here, it's likely the Torque motor can drive your lens as well. If your lens is exceptionally stiff, or has a lot of glass to move (such as the large cinema zooms from Cooke or Angenieux), the microRemote offers compatibility with Heden digital motors, including the M26VE. We recommend this motor for those situations where maximum power is a requirement.
Can I use it with my microFollowFocus unit?
They are different products, and do not share the same focus mechanism. The microRemote controls focus through a specialized high torque motor controlled electronically by the basestation. With the microFollowFocus, you simply reach up with your hand and move the knob which is directly connected to the lens mechanically.
So they are complementary and you may consider owning both types of follow focuses. In some cases you'll want to use the microRemote, other times it's easier and more intuitive to simply reach up use the microFollowFocus.
How does it work with lenses that don’t have hard stops, like Canon EOS lenses?
The microRemote has several options that are ideal for still lenses. You can use the manual lens calibration to set the end points on the lenses, and the shorter throw distance of still lenses is mapped to the full 270 degrees of rotation for precise, nuanced focusing. For Nikon lenses, the microRemote handheld controller can reverse direction.
Is it compatible with my camera and lens?
Most likely yes. The microRemote is not limited to specific camera body or lens type, and works across an incredibly wide range of systems.
My lens has a very short distance between close focus and infinity. How does the microRemote improve this?
All lenses are mapped to the full 270 rotation of the microRemote. This is especially helpful for DSLR lenses that have very short throws. The expanded mapping enables more refined and precise focus pulls on these lenses.
Can I reverse lens direction?
Yes – the microRemote has a feature to reverse lens direction so you can use all lenses in the ‘correct cinema’ direction.
Can I use the microRemote left or right handed?
What happens if there is too much wireless interference?
The microRemote can be used in tethered mode, where you use an optional wire to connect the microRemote to the basestation. This avoids all wireless interference and gives you exceptional performance under virtually any conditions.
What is the maximum distance for wireless?
The microRemote is rated to 300’ line of sight. Obstructions or other conditions may reduce that distance.
Can I use the microRemote for zoom or iris?
Yes, you can attach the motor to any geared ring on the lens, if you prefer to control zoom or iris instead of focus.
Can I use the microRemote for more than one function at one time? For example, for focus AND zoom?
The microRemote is currently a single channel focus controller. You can use it for one function at a time. You can always run two or more systems simultaneously to control zoom and focus (for example), each with its own controller.
Does it work with DSLR lenses?
Yes, you just need to have a gear on the lens’ focus ring. The microLensGears are an excellent choice for this. Also the microRemote system has special features for calibrating DSLR lenses automatically or manually, even if they have an “infinite spin” focus ring.
Will it work with my cinema lenses, such as PL-mount Zeiss, arri, etc.?
Yes - it is designed to work with any lenses and cameras, including Red, PL-mount cinema lenses, HDSLR, video cameras, etc. If your lens is exceptionally large or stiff, the microRemote is compatible with extremely high torque third party digital motors such as Heden or Preston.
Can the microRemote be powered with Anton Bauer?
Yes - D-tap for 14.4v brick batteries (such as Anton Bauer, Sony V-mount, IDX, Switronix, etc.) is a standard option to power the microRemote. Please see the microRemote power FAQ: http://on.fb.me/lnhKLs
Can I program the microRemote to do a long timelapse? Can it be programed to change focus slowly over a long period.
The microRemote is designed for cinema production video, so it's optimized for real-time control of focus. Time lapse photography is very different and is not supported with the microRemote.
With new releases of the iPhone have you made plans for future versions of the iPhone as the shape may change?
We have created a specialized plug-in cradle for iPhones and iPods present and future that can accommodate different designs.
Questions regarding the microRemote | blue with iOS support
Do I have to use an iOS device (iPhone/iPod) on the microRemote | blue or can it be used without it?
The iOS device is completely optional. You can choose to use it, or use the standard control plate. You can alternate between the two modes so you aren’t locked into making a choice.
How is the iOS device powered?
The iOS device runs on its own batteries while inside the microRemote. The microRemote will recharge the iOS device when plugged in.
What happens if my iPhone rings while in the microRemote | blue?
It will probably annoy everyone on set, but it will not affect the performance of the microRemote. However, if you use an iPhone in the microRemote we strongly recommend you turn Airplane mode to “On”, turn notifications “Off” and minimize use of any background applications.